Json.Decode
Defined in json@0.4.0
Reads what you want out of a JSON document and leaves the rest of it unread.
A Decoder a reads an a from where the cursor stands and leaves the cursor behind what it
read. Build one out of the primitives below, chain them with * and ;;, and run it over a
document with decode.
// The number the member `x` of the object at the cursor holds.
_x : Decoder F64;
_x = (
enter_object;;
let span = *read_member;
let is_x = *is_named(span, "x");
if !is_x { Decoder::fail_expecting("the member x") };
read_number
);
let value = *_x.decode("{\"x\": 1.5}"); // ok(1.5)
A string comes back as a Span, where its bytes stand in the document, and those bytes are the
ones the document holds: an escape such as \n or \u0041 stands there as the escape.
is_named and read_text resolve the escapes; is_named_as_written reads the bytes as they
stand.
A reading that fails answers with a message naming what the grammar expected and where it stood.
Values
namespace Json.Decode
make_cursor
Type: Std::String -> Json.Decode::Cursor
A cursor standing at the first byte of a document.
Parameters
text- The document to read.
make_span
Type: Std::I64 -> Std::I64 -> Std::Bool -> Json.Decode::Span
The span of the bytes from from up to to, which escaped says whether an escape stands
among.
Parameters
from- The position of the first byte of the text.to- The position one past its last byte.escaped- Whether a backslash stands between the two.
namespace Json.Decode::Decoder
advance
Type: Json.Decode::Decoder ()
Moves the cursor one byte on.
decode
Type: Std::String -> Json.Decode::Decoder a -> Std::Result Std::ErrMsg a
Runs a reading over a whole document, and answers with what it read.
Parameters
text- The document to read.decoder- The reading to run.
Examples
read_number.decode("1.5") // ok(1.5)
read_number.decode("x") // err("expected a number at 0")
enter_array
Type: Json.Decode::Decoder ()
Takes the bracket an array opens with, leaving the cursor on its first element.
enter_object
Type: Json.Decode::Decoder ()
Takes the brace an object opens with, leaving the cursor on its first member.
fail_expecting
Type: Std::String -> Json.Decode::Decoder a
A reading that fails, saying what the grammar expected and where.
Parameters
what- What the grammar expected there.
is_at
Type: Std::U8 -> Json.Decode::Decoder Std::Bool
Whether the byte at the cursor is byte, which is false where the document has ended.
Parameters
byte- The byte to look for.
is_at_end
Type: Json.Decode::Decoder Std::Bool
Whether the cursor has reached the end of the document.
is_named
Type: Json.Decode::Span -> Std::String -> Json.Decode::Decoder Std::Bool
Whether the text of span is name.
A span that carries an escape has it resolved first, so a name written "\\u0078" answers to
"x".
Parameters
span- Where the name read from the document stands.name- The name to compare it against.
is_named_as_written
Type: Json.Decode::Span -> Std::String -> Json.Decode::Decoder Std::Bool
Whether the bytes span stands on are name, taken as the document writes them.
An escape among them stands as the escape, so a name written "\\u0078" does not answer to
"x". Use this where the document is known to write its names plainly.
Parameters
span- Where the name read from the document stands.name- The name to compare it against.
read_array
Type: s -> (s -> Json.Decode::Decoder s) -> Json.Decode::Decoder s
Reads the array the cursor stands on, handing each element to element and carrying the
state it answers with to the next one.
An element it reads nothing of is passed over here, as a member is in read_object.
Parameters
state- What the reading starts from.element- What to do with one element.
Examples
read_numbers : Decoder (Array F64);
read_numbers = read_array([], |values| let v = *read_number; pure $ values.push_back(v));
read_numbers.decode("[1.0, 2.0, 3.0]") // ok([1.0, 2.0, 3.0])
read_numbers.decode("[]") // ok([])
read_bool
Type: Json.Decode::Decoder Std::Bool
Reads the true or false the cursor stands on.
read_member
Type: Json.Decode::Decoder Json.Decode::Span
Reads a member's name and the colon behind it, and answers with where the name stands.
read_null
Type: Json.Decode::Decoder ()
Reads the null the cursor stands on.
read_number
Type: Json.Decode::Decoder Std::F64
Reads a number, which runs to the first byte that no number can carry.
read_object
Type: s -> (Json.Decode::Span -> s -> Json.Decode::Decoder s) -> Json.Decode::Decoder s
Reads the object the cursor stands on, handing each member to member and carrying the
state it answers with to the next one.
member is handed where the name stands and the state so far. A member it reads nothing
of is passed over here, so a reading answers for the names it knows and leaves the rest
alone.
Parameters
state- What the reading starts from.member- What to do with one member.
Examples
type Point = struct { x : F64, y : F64 };
read_point : Decoder Point;
read_point = read_object(Point { x : 0.0, y : 0.0 }, |name, point|
if *is_named(name, "x") { let v = *read_number; pure $ point.set_x(v) };
if *is_named(name, "y") { let v = *read_number; pure $ point.set_y(v) };
pure $ point
);
read_point.decode("{ \"y\" : 2.0, \"z\" : 9.0, \"x\" : 1.0 }")
// ok(Point { x : 1.0, y : 2.0 }) -- any order, and `z` is passed over
read_separator
Type: Std::U8 -> Json.Decode::Decoder Std::Bool
Reads the byte that closes a member list or separates it from the next member, and answers with whether another member follows.
Parameters
closing- The byte that closes this list.
read_text
Type: Json.Decode::Span -> Json.Decode::Decoder Std::String
The text the span stands for, with every escape resolved.
Parameters
span- Where the text stands.
Examples
// The text of a string value.
read_string : Decoder String;
read_string = (let span = *read_text_span; read_text(span));
read_string.decode("\"a b\"") // ok("a b")
read_string.decode("\"\\u0078\"") // ok("x") -- the escape is resolved here
// The name of a member, which `read_member` hands you as a span.
read_name : Decoder String;
read_name = (enter_object;; let name = *read_member; read_text(name));
read_name.decode("{\"x\":1.5}") // ok("x")
read_text_span
Type: Json.Decode::Decoder Json.Decode::Span
Reads the string the cursor stands on, and answers with where its text stands.
The walk to the closing quote sees every escape on its way, so the span it answers with says whether one stands inside it.
run
Type: Json.Decode::Cursor -> Json.Decode::Decoder a -> Std::Result Std::ErrMsg (a, Json.Decode::Cursor)
Runs a reading over a cursor, and answers with what it read and the cursor behind it.
Parameters
cursor- Where the reading begins.decoder- The reading to run.
skip_value
Type: Json.Decode::Decoder ()
Moves the cursor past the value it stands on, building nothing for it.
take
Type: Std::U8 -> Std::String -> Json.Decode::Decoder ()
Takes the byte byte, failing where the document holds something else.
Parameters
byte- The byte the grammar asks for there.what- What to call it in the report.
took
Type: Std::U8 -> Json.Decode::Decoder Std::Bool
Takes the byte byte where the cursor stands on it, and answers whether it did. Where the
cursor stands on another byte, or the document has ended, it stays where it is.
Parameters
byte- The byte to take.
took_null
Type: Json.Decode::Decoder Std::Bool
Takes the null where the cursor stands on it, and answers whether it did. Where the cursor
stands on anything else, it stays where it is, so that a member whose value may be null is
read by asking here first.
namespace Json.Decode::Span
escaped
Type: Json.Decode::Span -> Std::Bool
Whether a backslash stands among the bytes, so that the text needs unescaping to be read.
from
Type: Json.Decode::Span -> Std::I64
The position of the first byte of the text.
to
Type: Json.Decode::Span -> Std::I64
The position one past the last byte of the text.
Types and aliases
namespace Json.Decode
Cursor
Defined as: type Cursor = unbox struct { ...fields... }
A document and how far into it a reading has come.
Decoder
Defined as: type Decoder a = unbox struct { ...fields... }
A reading that takes a value out of a document and leaves the position after it.
Span
Defined as: type Span = unbox struct { ...fields... }
Where the text of a string stands in a document, and whether an escape stands among its bytes.